• Very low emission 
• EMICODE EC 1PLUS
• User friendly
• Non-flammable 
• Favourable spreading capacity
• High penetration capacity 

Primer for:

• improving the adhesion of levelling compounds on absorbent and stony subfloors
• improving the top-layer of absorbent and stony subfloors
• self-levelling anhydrite floors, that must be levelled and/or on which a floor covering must be applied. 

• The subfloor must be moisture-absorbent and have a good tensile and compression strength. The subfloor should also be clean, permanently dry and free from grease, dirt and dust, according to the requirements of BS 8203 or DIN 18 365.
• For the requirements pertaining to calcium sulphate-bound cast floors we refer to the CUR recommendation [Cast floors with calcium sulphate as a binding agent] (Foundation CUR in Gouda), number 107.
• On very porous anhydrite subfloors we advice, to avoid the chance of an orange peel effect, to apply 2 coats of 044 Europrimer Multi or 1 coat of 043 Europrimer Alphy.
• In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

• Apply 049 Europrimer ABS evenly and covered with a lambswool roller and/or brush.
• If required 049 Europrimer ABS can also be applied with a spray-gun.
• After drying the subfloor can be treated as required. 
• Clean tools immediately after use with water. 
• Remove fresh spots immediately with water.
• Avoid contact with eyes and skin and use suitable personal protection equipment (please refer to our safety sheet).
• Product residues and cleaning water drains according to local applicable environmental rules and do not drain in the sewer.

Working conditions:
Intended surrounding temperature : 15° - 23 °C.
Material and subfloor temperature : min. 10° - max 25 ºC.
Relative humidity : 40 - 70%.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1). May produce an allergic reaction.