• Very low emission
• Emicode EC 1PLUS
• High coverage efficiency

• The anhydrite floor must be stable to pressure and traction. The subfloor must also be level, clean, permanently dry, and free of grease, dirt and dust, as per the requirements outlined in DIN 18 365.
•  Always consult our technical product data sheets if in doubt. If you have any doubts about using a product, contact our Technical Advice department.

• Shake the packaging well before use.
• Apply 043 Europrimer Alphy evenly using a napped roller. Please ensure sufficient primer is applied by regularly loading the roller with fresh product.
• 043 Europrimer Alphy may also be sprayed if desired.
• Do not walk on the floor while the product is drying.
• Once the primer has dried, the floor can be finished further.
• Clean tools immediately with water.
• Remove fresh stains immediately with water.
• Avoid contact with eyes and skin and use suitable personal protection equipment (please refer to our safety sheet).
• Clean product trances and dispose of cleaning water according to locally applicable environmental regulation and do not dispose of in the sewer.

Working conditions:
Required surrounding temperature : 18 - 23 °C.
Temperature for material and subfloor : min. 15° – max. 20 °C.
Relative humidity : 40 - 70%.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1). May produce an allergic reaction.