• Two-component, self-levelling, elasticized, heavy-duty special PUR floor levelling and repair compound for renovation and new construction.
• Ideal for the renovation of old substrates (old, even elastic adhesive residues, blocking odours from the substrate).
• Migration barrier on rubber granulate or cork-rubber insulation underlays.
• Suitable as subfloor for laying elastic floor coverings and parquet after dull sanding with Eurocol adhesives approved for this purpose.
• Can be used as a filling adhesive primer on mastic asphalt, metals.
• As a highly durable 2-component PUR coating for industrial and sports facility construction. 
• Suitable
  • for filling cable ducts,
  • for filler work, also in the bathroom area (permanently dry substrate),
  • for permanently elastic subfloors in sports hall construction,
  • for putty work on glued elastomer/cork underlays,
  • can be used for crack repair on mastic asphalt, 
  • for filling on fixed (also nubbed) elastomeric floorings (renovation).
• The floor levelling compound is suitable for forklift loading.
• Excellent adhesion on smooth surfaces, e.g. terrazzo, degreased metals, mastic asphalt.
• No crack formation.
• For interior and exterior use (permanently dry areas).
• Very low emission. EMICODE EC 1 Plus.

• The substrate must be permanently dry, resistant to pressure and tension, free from cracks and dust, even and free from layers that reduce adhesion.
• Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures in accordance with the specifications of DIN 18365/DIN 18356.
• Old fixed floors, such as ceramic tiles, terrazzo, stone floors, are to be professionally cleaned with Eurocol 891 Euroclean Basic and sanded matt after drying. 
• A primer coat of Eurocol adapted to the substrate is to be pre-coated. Allow the applied primer to dry thoroughly.
• Mastic asphalt, degreased metal surfaces, wood-based panels, old parquet/ planks without impurities can be levelled directly.
• Cracks or joints (except structural expansion joints) must be closed with Eurocol Europlan 913 Silicate sealing compound.
• Appropriately dimensioned Eurocol edge strips are to be used for rising building components.
• In the event of defects, objections must be reported in writing.

• Before use, temper the product according to the processing conditions.
• Empty the hardener component completely into the resin component and mix homogeneously with a suitable stirrer for approx. 5 minutes, also in the wall and bottom areas of the containers. Immediately decant into a clean container and mix again.
• The levelling compound is applied with a spatula, trowel or trowel. A smooth, even surface is achieved by using a squeegee of a spiked de-aeration roller.
• If a 2nd application is necessary, it can be applied after the first layer has hardened. In order to avoid adhesion problems, the first application layer, which has set tack-free, should be sanded matt.
• To fill deeper channels or slots, the compound can be extended with dry quartz sand Europlan Sand 846 or 847. The mixing ratio can be adjusted up to a putty-like consistency. However, the self-levelling properties are strongly limited by this.
• Similarly, mastic asphalt can be used to close cracks. Standard reinforcing clamps should be used and applied professionally. It is advantageous if the prepared mortar is applied to the freshly applied primer, consisting of 910 Europlan PU Duo, wet - in - wet. The flanks of adjoining screeds should also be primed.
• Before laying a covering, the filled surface must be sanded with grid grain 100 and then vacuumed.
  During the subsequent laying of floor coverings, care must be taken to ensure that there is no absorbent subfloor. This must be taken into account when selecting the adhesives and fixings to be used, especially with regard to their flash-off time. Please consult our application technology for this. Depending on the type of flooring, suitable Eurocol reaction adhesives are preferred.

Working conditions:
Required surrounding temperature: min. 18°C.
Material and subfloor temperature: min. 15°C.
Relative humidity: 35 - 75%, recommended <65%.