• Ready to use, rollable and spatulaable, filling, one-component, dispersion-based primer.
• Use prior to Eurocol lacquers to ensure perfect surface appearance.
• For all standard, fully bonded parquet types and parquet woods, also on upright lamella, planks, swing floors and for cork floors. Not for application on exotic, smoked oak.
• High neutrality of the wood tint.
• Long wet - in wet workability (rollability).
• No visible transitions during rolling and troweling.
• High elasticity.
• Reduces side gluing.
• For interior use.
• The product can be used on underfloor heating.
• Very low emission laying material corresponding to EMICODE EC1 Plus.
• Declared by baubook, "ecological building product".

Before use, temper the product according to the processing conditions.

• Shake well before use!
• Preferably decant the varnish into a sealing bucket and use a scraper grid when applying.
• The application has to be done with a clean Eurocol Aqua microfibre roller 25 cm. Alternatively, apply 2 even coats using a double-surface trowel. An evenly closed surface must be created in order to avoid differences in colouring caused by the top coat.
  
• During application on the prepared parquet floor, use shoe covers for the shoes to avoid footprints.
• After complete drying, seal with approved Eurocol water-based varnishes.

During the drying process, ensure even ventilation. Avoid draughts and direct sunlight.

Working conditions:
Required surrounding temperature: min. 18°C.
Material and subfloor temperature: min. 15°C.
Relative humidity: 35 - 75%, recommended <65%.