SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Forbo Websites

Select a division
Forbo Group
Forbo Flooring Systems
Forbo Movement Systems
CONTACT FAQ

eurocol
802 EUROSTRIP BASIC

802

Self-adhesive edge strips made of PE foam. To prevent horizontal noise pollution. Also applicable for absorbing settlement when leveling, for example, floating screed floors or on wooden panels. Also prevents damage or contamination of the wall or skirting board when leveling or sanding the floor

802_2017.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • Product Typification
    Self-adhesive PE-foam strips. To prevent horizontal noise pollution and no more damage or contamination of the skirting board when leveling or sanding.
    Basis : PE-foam.
    Colour : White.
    Roll length : 25 m.
    Dimensions : Length 25 m. Width 20 mm. Thickness 5 mm.

    Product advantages:
    • Easy application 
    • Self-adhesive
    • Permanent elastic 
    • Don't rot
    • Moisture-resistant 
    • Vapour permeable

  • Performances
    Frost resistance : yes.
    Special quality : self adhesive.
  • Application
    802 Eurostrip Basic is suitable for any type of subfloor that is compressive and tensile resistant. The subfloor must also be flat, clean, permanently dry, free of grease and dirt, in accordance with the requirements stated in DIN 18 365. To prevent horizontal noise nuisance in combination with 820 DIM Floor. To prevent deformation during drying of the levelling compound due to expansion. As a barrier to compartmentalise when levelling a.s..
  • Working Process
    Tools : Knife or scissors.
    Storage : Cool and dry, well sealed at normal temperature (5° - 30°C).
    Shelf Life : Minimum 36 Months, in unopened packaging.
    Frost-proof : yes.
    Remarks : For the installation of higher layers of levelling compounds or 971 Europlan DE Rapid thin screed, we recommend the 806 Eurostripe Profile.

    * The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

    Substrate:
    • 802 Eurostrip Basic is suitable for any type of subfloor that is compressive and tensile resistant. The subfloor must also be flat, clean, permanently dry, free of grease and dirt, in accordance with the requirements as stated in DIN 18 365.
    • Prime sanding subfloors with 044 Europrimer Multi, 049 Europrimer ABS or 099 Dispersion Primer.
    • When leveling thicker layers, we recommend using the 806 Eurostrip Profile.
    • Always consult our technical product information sheets in advance. If you have any doubts about the applications to be made, please contact our Technical Advice department in advance.


    User manual:

    Remove the applied protective film from the self-adhesive side and place the 802 Eurostrip Basic tape directly on the desired location on the wall or floor. Then cut or trim the tape to the correct size.

    Processing conditions: 

    Required subfloor temperature : min. 15 °C.
    Temperature for material and surrounding : min. 18 °C.
    Relative humidity : 35 - 75%.




  • Environment and health
    Hazard Class : None.
    Safety and environment : Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.


  • Articles
    ArticleDefinitionPackagingEAN-code
    802Eurostrip BasicCarton of 1 roll of 25 m1.8 710345 802017