• Easy to mix
• Ready to use
• To be used in combination with a pump or manually

390 FloorColouring is available in 3 colours:

White (1 jar 390):

White (2 jars 390):

White (3 jars 390):

Soft Black (1 jar 390):

Soft Black (2 jars 390):

Soft Black (3 jars 390):

Brown (1 jar 390):

Brown (2 jars 390):

Brown (3 jars 390):

Processing conditions and subfloor:

• See the product information sheets of the approved Eurocol levelling compounds.

• For the best possible result, we advise to work with at least 2 people. This allows you to mix several packs and apply them to the floor in quick succession.
• Fill the mixing container with 5.5-6 litres of cool and clean tap water and add the levelling compound. Mechanically mix the compound with a Eurocol 855 mixing rod for at least 1 minute (at least 1,000 revs per minute) until a smooth and lump-free mix is obtained.
• Then add the powder pigment (max. 3 230g jars) to the compound and mechanically mix everything for at least 1 minute, until it has all been thoroughly mixed.
• In between mixing, move a spatula along the inside of the mixing container to properly mix the levelling compound and the pigment.
• Set aside the compound for approx. 3 minutes and then briefly stir it, at a low rev count.
• The compound must then be processed within 20 minutes. Apply the levelling compound in small portion randomly across the floor to avoid repetitive patterns or stripes.
• Spread the compound with the trowel, making random strokes to create the desired (concrete look) effect. Always let the different containers of levelling compound mix wet on wet.
• Apply the compound in a minimum thickness of 3mm.
• When pumping the powder pigment add to the dry compound (max. 3 230g jars per 23kg of levelling compound) and set the mixing unit to allow for the required amount of water to be added.
• Layers of levelling compound recently applied must be protected against draught and direct sunlight.
• In normal circumstances, the applied layer of levelling compound can be walked on after 2-3 hours. Always wear shoe covers.
• At a layer thickness of approx. 3-4 mm and a temperature of 15 - 20 °C the floor screed is ready to be finished with 301 BaseSealer and 311 Topcoat paint system after at least 24 hours. For this, see the relevant product information sheets.
• For detailed information about these safety measures please refer to the safety information sheet on our website www.eurocol.nl.

Underfloor heating constructions:

390 FloorColouring can be used on underfloor heating constructions. The start-up protocol of the underfloor heating must first have been performed entirely in accordance with supplier guidelines. Switch off the heating one day before application; switch back on at least 24 hours after applying levelling, in steps of 5 °C water temperature maximum per day.