232 EUROSOL MONTAGE

Product Typification

TODO

Basis	:	Synthetic rubber in solvent. Filler.
Colour	:	White.
Consistency	:	Pasty.

Product advantages:

Elastically curing mounting adhesive, allows materials to be positioned for accurate alignment especially for installation of wooden or hard-vinyl skirting boards. Also used for joint sealing and installation of chip and gypsum-boards, gypsum plasterboards, insulation and acoustic panels.
For installation of construction boards, window seats made of plastic, natural stone or composite materials.
Excellent adhesion properties on concrete, wood materials, clean metal surfaces.
Not for styropor.
GISCODE S 1. Please check safety data sheet!

Performances

Consumption	:	ca. 20 – 40 ml/rm
Curing	:	2 - 4 days, depending on application thickness.
Flammability	:	Contains a highly flammable solvent.
Special quality	:	White. No discoloration.

Application

Application:

for the installation of skirtings made of wood and rigid PVC
for attaching chipboard, gypsum and plasterboard
for fixing panels, insulation and acoustic panels

Working Process

Tools	:	Cartridge gun.
Waiting time	:	5-10 minutes.*
Curing	:	2 - 4 days, depending on application thickness.
Storage	:	Store dry and free from frost. (5 - 30°C). Protect against high temperatures.
Shelf Life	:	Approx 12 months, in unopened packaging. After use close the open packaging well.
Cleaner	:	Acetone.
Remarks	:	Technical information and safety data sheets of other laying materials and floorings/parquet must be observed! The instructions of the respective profile manufacturers must be observed, especially when gluing stair nosing edges. In case of doubt, the adhesive side must be degreased/cleaned of exudates. In high humidity, a moisture precipitation can form on the drying adhesive near the dew point temperature, which then hinders contact bonding. In such cases, briefly apply warm air to the adhesive surfaces. Ensure sufficient ventilation of the work rooms! The adhesive contains highly volatile and flammable solvents which, when combined with air, form explosive mixtures which collect at the lowest point. We refer to the Ordinance on Hazardous Substances § 16, Duty of investigation. Please check whether the work to be performed can be carried out with solvent-free products.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
ca. 20 – 40 ml/rm

Substrate:

The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures.
In case of defects, objections are to be reported in writing.

User manual:

Before use, temper the product according to the processing conditions.
Remove the lid of the cartridge edge and cut the membrane of the cartridge exit off. Screw the top of the nozzle off and cut it according to the desired width.
Apply the adhesive as dots or waves on the backing of the material or on the subfloor. The amount of adhesive depends on how even the subfloor is.
Press both sides together immediately to get the adhesive on both sides, separate both sides again, allow them to rest for 5 - 10 min, press them together and rub them down well. Pressing both sides together should be done before the adhesive develops a sking, otherwise the adhesion power cannot be guaranteed.

Processing conditions:

at least 15 °C floor temperature,
at least 18°C material and room temperature,
35-75% relative humidity, recommended <65%.

Environment and health

GISCODE	:	S1
LEED	:	VOC 299 g/l
DGNB	:	VOC 24 %
Hazard Class	:	Contains hazardous ingredients. Please observe the notes in the Safety data sheet!
Safety and environment	:	Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Bound material residues can be disposed of as household waste.
MSDS	:	Available on request.

Articles

article	productname	packaging	shipping unit
232	Eurosol Montage	PE cartridge à 0,31 l	12/box 1440/pallet

SelectYourLanguage

Forbo Websites

Select a division

eurocol
232 EUROSOL MONTAGE