SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Forbo Websites

Select a division
Forbo Group
Forbo Flooring Systems
Forbo Movement Systems
CONTACT FAQ

eurocol
140 EUROMIX PU PRO

140

2-component PUR universal adhesive for bonding rubber tiles, homogeneous and heterogeneous PVC or recycled PVC covering in tiles or slats on various absorbent or non-absorbent substrates such as: wood, MDF and metal panels, gypsum fibre boards, cement and gypsum-based levelling compound, concrete and ceramic tiles. Resistant to heavy rolling traffic. Moisture and weather resistant. Very high final bond strength. Suitable for indoor and outdoor applications. Thanks to EMICODE EC 1PLUS (very low emission) also suitable for BREEAM projects.

140-euromix-pu-pro.jpg
  • safety data sheet_140_euromix_pu pro_uk.pdf

    safety data sheet_140_euromix_pu pro_uk.pdf

  • safety data sheet_eurocol_140_hardener_pu_uk.pdf

    safety data sheet_eurocol_140_hardener_pu_uk.pdf

  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • licence 140-pu extra_ec1plus_2020_uk.pdf

    licence 140-pu extra_ec1plus_2020_uk.pdf

  • Product Typification
    Water-resistant 2-component PU adhesive.
    Basis : Polyurethane resin and isocyanat hardener.
    Colour : Component A: Dark Grey. Component B: brown.
    Consistency : Pasty.

    Product advantages:

    Highly durable, fast curing, water- and solvent-free, two-component PUR adhesive.

    For laying rubber floor coverings in tiles with rough backings, PVC- and recycled PVC floor coverings (tiles and panels), metal, ceramic, wood.

    Bonding is carried out on standard-compliant, fully levelled substrates like absorbent and non-absorbent mineral-based subfloors, sanded mastic asphalt, wood composites, dry screeds which are permitted for floor covering installation. Reactive primers must be sprinkled with quartz sand.

    • Water-resistant
    • Moisture-resistant and weatherproof
    • Heavy duty resistant
    • Non-flammable
    • Extremely high final bond strength
    • Temperature resistant from -40 °C to +150 °C 

    Can be used on underfloor heating systems. 

    For indoor use only.

    Very low emission certified EMICODE EC 1 Plus.

    Emission-tested construction product according to DIBt principles.


  • Performances
    Consumption : 550 - 650 g/m², depending on material and subfloor and floor covering.
    Curing : Approx. 8 -10 hours.*
    Flammability : Non-flammable.
    Frost resistance : Yes.
    Special quality : Also suitable for gluing wood block RE/WE or end-grain wood parquet.
    Specific weight : Comp. A 1.9 kg/l, Comp. B 1.24 kg/l.
  • Application

    For the installation of:

    • rubber floor covering
    • vinyl floor covering
    • concrete

  • Working Process
    Tools : Adhesive spreader. The type of spreader depends material and subfloor.
    Open time : Approx. 70 minutes.*
    Mixing ratio : 100 parts by weight of component A 15 parts by weight of component B.
    Processing time : Approx. 70 minutes.*
    Curing : Approx. 8 -10 hours.*
    Storage : Store cool and dry in unopened packaging.
    Shelf Life : Approx 18 months, in unopened packaging. Do not mix partial portions.
    Cleaner : 815 Euroclean HandClean, 358 ToolCleaner.
    Frost-proof : Yes.
    Remarks : 

    Technical information and safety data sheets of any installation materials and floor coverings used must be observed!
    It is recommended to wear suitable gloves when applying the adhesive, as the reaction components penetrate deep into the skin.
    penetrate and are difficult to remove. Cured adhesive can only be removed mechanically.
    The adhesive has excellent adhesion properties on most materials. Due to the large number, in case of doubt to carry out adhesion tests during processing.
    When bonding to underfloor heating, a stabilising primer with approved Eurocol-Reaction resin primers necessary. In order to reduce adhesion problems on reaction resin primers, these are available in the Sand off excess with Eurocol 846 Europlan sand.
    The adhesive cures even at lower temperatures. However, due to the higher viscosity at low temperatures affects the processing. The curing time is considerably longer. In addition, the adhesion becomes too smooth surfaces, especially metals, reduced (observe dew point formation). 

    EMICODE, further information at www.emicode.com.
    Not a consumer product according to 1999/EG/44.


    * The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

    Consumption:
    550 - 650 g/m², depending on material and subfloor and floor covering.

    Substrate:
    • The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
    • Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures in accordance with the specifications of DIN 18365/DIN 18356/BS 8203.
    • Old fixed floors, such as ceramic tiles, terrazzo, stone floors, metals, must be professionally cleaned and sanded matt after drying.
    • Cracks or joints (except structural expansion joints) are to be closed with Eurocol grouting compounds Europlan 913 Silicate.
    • Prime porous, rough surfaces and cement screeds that are crumbling on the surface with 021 Euroblock Reno LE. If alkaline moisture or construction moisture is present and the stony subfloor is above groundwater-level apply two coats 021 Euroblock Reno LE. In order to create a sufficient bonding bridge for later application of the adhesive, the filled surface should be sprinkled with fine, dried sand.
    • As the adhesive has a strong filling effect, there is generally no need to apply a filler.
      If necessary, use Eurocol 140 Euromix PU Pro or Eurocol 910 Europlan PU Duo.
      In order to create a sufficient bonding bridge for later application of the adhesive, the filled surface should be sprinkled with fine, dried sand, such as 846 Europlan Sand (quartz sand), or the filled surface should be sanded matt.
    • In the event of defects, objections must be made in writing.
    • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.


    User manual:

    Before use, temper the product according to the processing conditions.

    The adhesive will also bond at lower temperatures, but will be less easy to apply. Besides the bonding of the adhesive will slow down and the adhesion on smooth surfaces, in particular metal, will decrease strongly. Check in advance if the rubber floor covering is ready for installation or has to be sandpapered beforehand.

    Directions for use:

    • Add component B to component A.
    • Stir thoroughly, using an electric stirrer, to a smooth and homogeneous mixture.
    • Only mix as much adhesive that can be used within the mentioned pot life.
    • Apply the mixture immediately on the subfloor with the recommended adhesive spreader. The quantity of adhesive depends on material and subfloor.
    • When fixing a floor covering with a stud back make sure to apply sufficient adhesive, so the hollow sections between the studs are sufficiently filled with adhesive. Due to the large variety of backings it is not possible to indicate a standard adhesive spreader and spreading capacity.
    • When laying parquet, ensure that the parquet is approx. 1.5 cm away from the wall.
    • Place the floor covering directly into the wet adhesive. A short waiting time within the open time of 30 minutes improves the final adhesion a little. In case of topping edges place a load during 6 hours.
    • To avoid accumulation of the adhesive do not walk on the fresh applied floor covering. Always walk behind the roller during rolling.
    • Repeat pressing and roling after 1 - 2 hours.
    • Remove fresh adhesive spots immediately with white spirit. Clean tools immediately after use with white spirit.

    Underfloor heating systems:

    140 Euromix PU Pro can be applied on underfloor heating systems. The startprotocol of the floorheating needs to be completly executed in accordance with the directives of the supplier. Turn off the heater 24 hours before application; do not heat again until at least 24 hours after installation, in steps of maximum 5 °C watertemperature per day.

    Working conditions:

    Required surrounding temperature      : 18 - 23 °C.
    Temperature for material and subfloor : min. 15° - max. 20 ºC.
    Relative humidity                               : 40 - 70%. 





  • Quality and guarantee
  • Environment and health
    GISCODE : RU1
    LEED : VOC 0 g/l, meets: IEQ Credit 4.1
    DGNB : VOC 0 %, quality level: 4
    Hazard Class : Component A: None. Component B: contains hazardous ingredients. Please observe the notes in the Safety data sheet!
    Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Bound material residues can be disposed of as household waste. From 24.8.2023, training is mandatory for handling preparations containing isocyanates. https://isopa-aisbl.idloom.events/049-de
    MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.
    Substances causing allergy : Hardener: Contains isocyanates. May produce an allergic reaction.





  • Articles
    ArticlepPoductnamePackagingShipping unitEAN-code
    140Euromix PU PROPE combi pack à 6.9 kg
    		8 710345 140690
    140Euromix PU PROPE combi pack à 6,7 kg65/pallet
    140Euromix PU PROPE combi pack à 13,4 kg52/pallet