070 EUROPRIMER FILL

Product Typification

Fast and filling primer, priming and filling in one step, fast drying and no quartz sand blinding before leveling on damp proof coats.

Basis	:	Acrylic dispersion.
Colour	:	Yellow.

Product advantages:

Ready to use, one-component, fast drying primer to prime and fill (in one step) absorbent and non-absorbent cement- and calcium sulphate (gypsum) based subfloors (screed), stonewood screed, ceramic tiles, wooden floorboards, parquet, mastic asphalt, gypsum
based floor boards such as Fermacel, Knauf.
For priming and levelling of slight irregularities and joints on ceramic tiles, planks, parquet, wooden composites, gypsum-based floor boards before levelling works.
Adhesive promoter for levelling works on approved damp proof membrans.
For indoor use.
Very low VOC emission. EMICODE EC 1 Plus.
Declared by baubook, "ecological building product".

Performances

Colour fastness	:	Yellow.
Consumption	:	App. 100 – 150 g/m².
Specific weight	:	Approx. 1.30 kg/l.

Application

Application:

Primer for:

as a dust-binding primer on absorbent surfaces,
as adhesion promoter on dense substrates,
for filling slight unevenness and joints in ceramic tiles, parquet etc.,
as a substitute for quartz sand blinding on Eurocol reactive primers approved for this purpose before filling or gluing work.

Working Process

Tools	:	Rubber spatula, brush, microfibre roller.
Open time	:	Revise within 24 hours.
Storage	:	Store cool and free from frost.
Shelf Life	:	Approx 15 months, in unopened packaging. After use close the open packaging well.
Drying	:	1 - 2 hours on stony absorbent subfloors. Min. 2 hours under calcium sulphate-based levelling compounds. *
Cleaner	:	Water.
Sensitive to frost	:	Yes.
Remarks	:	Technical information and safety data sheets of other laying materials and floorings/parquet must be observed! With dense subfloors or deeper joints, drying will be slower. Here, the use of fans can reduce the Drying can be accelerated. Use released Eurocol reactive primers for subsequent levelling over 5 mm. These must be sprinkled with quartz sand. On mastic asphalt screeds (DIN 18354 / EN 13813), the approved maximum layer thickness for levelling work must be in accordance with the respective Data sheets of the levelling compounds are available. Not to be used on old stone-wood screeds and magnesia screeds on terrazzo, stone floors, natural stone (deep impurities), not directly under reactive Eurocol adhesives. EMICODE, for further information please visit www.emicode.com.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
App. 100 – 150 g/m².

Substrate:

The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures in accordance with the specifications of DIN 18365/DIN 18356.
Old fixed floors, such as ceramic tiles, terrazzo, stone floors, must be thoroughly cleaned and sanded matt after drying.
Cracks or joints (except structural expansion joints) are to be closed with Eurocol Europlan 913 Silicate sealing compound.
In case of defects, objections are to be reported in writing.

User manual:

Before use, stir and allow to come to room temperature. For longer breaks in work, stir again to achieve a homogeneous mixture.
Apply undiluted and evenly on the prepared substrates. Avoid puddle formation to ensure even drying.
In case of deeper joints, if necessary, apply a 2nd coat after about 30 - 60 minutes to reduce joint tilting of the following filler.
After drying for about 1 - 2 hours, depending on the absorbency of the substrate, the room climate and the quantity applied, a second coat can be applied with Eurocol levelling compounds suitable for the substrate and adapted to the subsequent use.
can be filled.
When using as adhesion promoter on Eurocol reactive resin primers approved for this purpose, it must be ensured that the application is carried out on a surface of the reactive resin primer that has been cured without adhesive and roughened with a black pad.

Eurocol 042 Euroblock Turbo	1-C - PUR-Primer
Eurocol 015 Euroblock MS	1-C – SMP – Damp Proof Coat
Eurocol 021 Euroblock Reno LE	2-C - EP Blocking Primer

Filling work must be carried out within 24 hours.

Use released Eurocol reactive primers for subsequent levelling over 5 mm. These must be sprinkled with quartz sand.

Processing conditions:

At least 15 °C floor temperature,

at least 18°C material and room temperature,

35-75% relative humidity, recommended <65%.

Quality and guarantee

Environment and health

GISCODE	:	D1
LEED	:	VOC 0 g/l, meets: IEQ Credit 4.1
DGNB	:	VOC 0 %, quality level: 4
Hazard Class	:	None.
Safety and environment	:	Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS	:	Available on request.
Substances causing allergy	:	Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2- methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1), 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.

Articles

artikel	productname	packaging	shipping unit
070	Europrimer Fill	PE bucket à 15 kg	40/pallet

SelectYourLanguage

Forbo Websites

Select a division

eurocol
070 EUROPRIMER FILL