• For in- and outdoor use 
• Non-flammable 
  
• Thin liquid easy to mix 
• Multi-purpose application 

• Additive for mortars, for the water-resistant fixing of tiles. 
• Adhesion improving additive for bonding-cement-slurry in case large tiles have to be fixed.
• Adhesion improving additive for mortars on critical subfloors, e.g.:
  - smooth and impervious subfloors;
  - high moisture absorbent subfloors.
• Additive for mortars in favour of:
  - higher mechanical strength;
  - higher bending strength;
  - smaller shrinkage. 

• The subfloor should be clean, free from grease and dust, dry and have a good tensile and compression strength. 
• In advance always seek our technical data sheets. In doubt about the application ask for technical advice. 

As an additive for bonding-cement-slurry in case large tiles have to be fixed:

• Add to 7 parts by volume of cement 1 part of 055 Additive and 2 parts of water.
• Stir thoroughly, preferably with an electric drilling machine, to a smooth and homogeneous mixture. 
• Pour out the mixture on the mortar bed and divide it with a 8 x 8 mm notched adhesive spreader. 
• Place the floor tiles within 15 minutes with a shuffling movement into the mortar. 
• Do not tap on the tiles with a hammer. 
• Spreading capacity: approx. 0.5 kg/m².

As a adhesion improving additive for mortars on critical subfloors:

• Add approx. 9.5 parts by volume of powder tile adhesive to 1 part of 055 Additive and 2 parts of water.
• Mix the mortar, preferably with an electric drilling machine, to a smooth and homogeneous mixture. 
• Apply the mortar on the subfloor with a broom or a 4x4 notched adhesive spreader. 
• In case of vertical application the mortar has to dry completely.
• Work wet-in-wet when applying a “rendering slurry” for mortars.
• Spreading capacity: approx. 0.3 kg/m².

As an additive for mortars to improve the watertightness:

• Mixing ratio sand/cement 3:1. 
• Add to 50 kg cement 3 kg of 055 Additive to the mixing-water and mix until a homogeneous mortar. 
• Spreading capacity: approx. 0.2 kg/m² per cm layer thickness.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1) and benzisothiazolinone. May produce an allergic reaction.

Environment and health

• Packaging is made of post-consumer recycled (PCR) plastic and is fully recyclable. Only submit packaging without residues for recycling. Dried material remains can be disposed of with household waste.